Gen 15 Hydrogen Fuel System for larger capacity engines

Gen 15 Hydrogen fuel system sealed

High power Gen 15 Hydrogen fuel system  as used on work vehicles and generators up to 8 litre capacity using the standard 600 Watt power supply.  Increasing the power of the the PWM constant current power unit allows the system to be used in larger engines up to 12litre capacity

Hydraulic fittings on these systems are now Nickle coated Brass fittings , (as shown)  replacing the previous HDPE plastic Legris fittings.  These fittings and cell are tested to 30 + Psi  and a perfect seal.   This model cell has been used to produce 7.2 Litres per minute at 13.2 volt.   More than enough for a very large diesel engine  / truck / genset / marine application

Gen 15 Hydrogen fuel system

 call gavan on 0403177183 to secure special offer

Gen 15 Hydrogen fuel system sealed.  High power Gen 15 Hydrogen Kit as used on work vehicles and generators up to 8 litre capacity using the standard 600 Watt power supply.  Increasing the power of the the PWM constant current power unit allows the system to be used in larger engines up to 12litre capacity

3 liter water  container. System uses 1 litre every 13 hours operating at 30 amp.

consumption ate 1 litre each 15 Hours operating at 25 amp

Engines to 8 liter capacity use this system at 25 amp and 12 volt.

System can be arranged to operate at direct DC , avoiding the PWM and thus avoiding wasting input voltage in operating the electronic PWM.   System can be operated at 12 volt to 24 volt.  Lass current is required operating at 24 volt.

Larger vehicles and small trucks can arrange to use a larger stainless steel electrolyte tanks  for greater distance between refills.  Specialist Potassium Hydroxide electrolyte is used to increase the gas production rate without heating.

Fast delivery express post or courier

Contact Gavan on 0403177183 for more details

Gen 15 Hydrogen fuel system sealed

3 liter water  container. System uses 1 litre every 13 hours operating at 30 amp.

consumption ate 1 litre each 15 Hours operating at 25 amp

Engines to 8 liter capacity use this system at 25 amp and 12 volt.

Gen 15 Hydrogen fuel system

System can be arranged to operate at direct DC , avoiding the PWM and thus avoiding wasting input voltage in operating the electronic PWM.   System can be operated at 12 volt to 24 volt.  Lass current is required operating at 24 volt.

Larger vehicles and small trucks can arrange to use a larger stainless steel electrolyte tanks  for greater distance between refills.  Specialist Potassium Hydroxide electrolyte is used to increase the gas production rate without heating.

Contact Gavan on 0403177183 for more details

Description

Views: 59
Gen 15 Hydrogen Fuel System for larger capacity engines
Gen 15 Hydrogen Fuel System for larger capacity engines

Gen 15 Hydrogen fuel system

Gen 15 Hydrogen Fuel System for larger capacity engines   Please Note

 call gavan on 0403177183 to secure special offer

Gen 15 Hydrogen fuel system.  High power Gen 15 Hydrogen Kit as used on work vehicles and generators up to 10 liter capacity using the standard 2500 Watt power supply. 

larger engines up to 12 liter capacity are easily Powered using Higher power output PWM electrical units 

  • 3 liter water  container. System uses 1 liter every 13 hours operating at 30 amp.
  • consumption at 1 liter each 15 Hours operating at 25 amp
  • Engines to 8 liter capacity use this system at 29 amp and 12 volt.

System are operated at 12 volt.  24 volt vehicles use a voltage inverter to reduce the input voltage to 12 volts.

The PWM power supply and pumping system used is rated at a maximum of24Volt.  Lass current is required operating at 24 volt.

Gen 15 Hydrogen fuel system

Larger vehicles and small trucks can arrange to use a larger stainless steel electrolyte tanks  for greater distance between refills.  Specialist Potassium Hydroxide electrolyte is used to increase the gas production rate without heating.

System Update  (october 27 2023)

Gen 15 Hydrogen fuel system can now be provided , mounted into a Dewalt ToughBox (High density Polyethylene) as shown in the attached Photo.

Gen 15 Hydrogen system in Tough-box plastic enclosure
Gen 15 Hydrogen system in Tough-box plastic enclosure 53 x 32 x 32

A very tough hardworking box ideal for trucking, farming, mining, marine and heavy duty work applications.  The HDPE material is able to handle rough work conditions as well as been easy to move around to new site applications with handle on top lid and handles on the sides. 

HDPE material is ideal to exposed operating conditions which are subject to extremes of heat.  Box is well laid out to make servicing very easy and easy to adjust the electrical current output as well as easy to fill with fresh water.  HDPE is Rust proof.  

System weight is 18 kg, the same as the steel enclosure but very tough and very protective of the hydrogen generator contents.

Hydraulic fittings on these systems are now Nickle coated Brass fittings , (as shown)  replacing the previous HDPE plastic Legris fittings.  These fittings and cell are tested to 30 + Psi  and a perfect seal. 

 This model cell has been used to produce 7.2 Liters per minute at 13.2 volt.   More than enough for a very large diesel engine  / truck / genset / marine application

Price is slightly more and size is 10 cm longer than the standard steel enclosure box..

Fast delivery express post or courier

Contact Gavan on 0403177183 for more details

Courier costs $180 TNT extra depending upon location .. contact Gavan glknox11@live.com

International Courier costs may be higher – email glknox11@live.com

To order a Unit   —-    1.  Order through Paypal  or

2.  Email me on glknox11@live.com or 

3.    SMS message  to 0403177183 

with your  name ,         Phone number ,        email address                        and Postal address           and I will email you a   Quote ,   my Company  ABN and Payment Details

Views: 59

Views: 67

Additional information

Weight 17 kg
Dimensions 44 × 30 × 32 cm