Hydrogen Kits

These Gen 10 Hydrogen Kits can be mounted into an extra Large Marine Battery box with 600W PWM power supply mounted mounted under the HDPE plastic lid

or a 1500 W PWM power supply mounted into a diecast aluminum box secured to the top of the HDPE plastic Lid

These Gen 10 hydrogen kits measure 42 cm x 21 cm wide x 33 cm high

These hydrpgen systems have the cells secured with tie down bolts securing a cross bar holding everything securely in position. T

he triple booster cells ( made from 6 cells internally) are locked together using 16 , 22 cm lengths of 316L stainless steel bolts and securing nuts and washes.

All electrolysis plates are Laser welded into the booster cell configuration With laser welded to stainless steel cable glands through the top of the assembly.

These Gen 10 Hydrogen kits are commonly used from vehicles and engines under 4 litre capacity ,

however now using the

1.   high power 1500 watt PWM or, 

2.  the new 12 FET constant current supply and

3.  more efficient Laser welding setup , Gen 10 kits are being used to power engines up to 8 litre capacity.

These systems have a Electrolysis plate area of 6400 square cm, and a total weight of 12 kg and 15 kg with the 3 litre tanks filled with water.

Recycling tanks are 3 litre tanks . Larger tanks can be connected in series with these tanks or replaced with larger tanks of your choice to give a greater range

ONE LITRE OF SOLUTION lasts for 13 hours at 23 amp , or 12 hours at 26 amp.

The next most popular arrangement of the Gen 10 system is the Gen 10 system mounted into a welded Steel enclosure box or the checker-plate aluminum enclosure box as shown below