Commercial quality Oxy – Hydrogen Flashback Arrestor. Thick vacuum sintered internal porous metal shield in conjunction with a high quality check valve. Rated at 116 liters per minute, or 7000 liters per hour. Maximum working pressure is 140 psi (10 bar). All brass heavy duty housing. Fits 1/4 ID hose. The very best flashback arrestor.
Minimum operating pressure: 3 psi. The check valve does produce minimal back pressure, about 2 psi.
The biggest safety concern when using hydrogen flashback arrestors is the chance of exceeding the volume rating of the arrestor. Many flashback arrestors are only rated at 10 liters per minute. If you exceed that volume, and a flashback occurs, these low volume arrestors may not stop the flashback.
This is why we sell only high volume commercial quality flashback arrestors, with the added protection of an internal check valve. For your safety, it is best not to take a chance on low volume arrestors. Only high volume arrestors will offer you the safety that you need to be assured you and your system are protected.
Upgarded Flashback Arrestor for Oxygen Hydrogen HHO Flame Generator Machine
Description:
1. Professional water hydrogen flame fire arrestor safety devices;
2. Material: brass chrome plated;Necessary accessories for Water hydrogen flame machine
3. It is generally put between two tubes behind water hydrogen Flame Gun, 1.5-2mm from machine outlet, and 0.3-0.5m from the gun.
Feature:
1. Professional water hydrogen flame fire arrestor safety devices;
2. Screw pressing design
3. Can be used for any other similar machines.
Usage:
Hose interface adopts screw pressing design, please pay attention to the pressing rubber hose. It is generally put between two tubes behind water hydrogen flame gun,
1.5-2mm from machine outlet, and 0.3-0.5m from the gun.
Note:
1.The lifespan of the flash-back arrestor is limited, multiple flashback will reduce its reliability, residual electrolyte may cause blockage.
2.If the flashback arrestor is block or does not work, please check or change it immediately. replace the new one timely. Otherwise, it may cause explosion and unable to work.
Commercial quality Oxy – Hydrogen Flashback Arrestor. Thick vacuum sintered internal porous metal shield in conjunction with a high quality check valve. Rated at 116 liters per minute, or 7000 liters per hour. Maximum working pressure is 140 psi (10 bar). All brass heavy duty housing. Fits 1/4 ID hose. The very best flashback arrestor.
Minimum operating pressure: 3 psi. The check valve does produce minimal back pressure, about 2 psi.
The biggest safety concern when using hydrogen flashback arrestors is the chance of exceeding the volume rating of the arrestor. Many flashback arrestors are only rated at 10 liters per minute. If you exceed that volume, and a flashback occurs, these low volume arrestors may not stop the flashback.
This is why we sell only high volume commercial quality flashback arrestors, with the added protection of an internal check valve. For your safety, it is best not to take a chance on low volume arrestors. Only high volume arrestors will offer you the safety that you need to be assured you and your system are protected.
Upgarded Flashback Arrestor for Oxygen Hydrogen HHO Flame Generator Machine
Description:
1. Professional water hydrogen flame fire arrestor safety devices;
2. Material: brass chrome plated;Necessary accessories for Water hydrogen flame machine
3. It is generally put between two tubes behind water hydrogen Flame Gun, 1.5-2mm from machine outlet, and 0.3-0.5m from the gun.
Feature:
1. Professional water hydrogen flame fire arrestor safety devices;
2. Screw pressing design
3. Can be used for any other similar machines.
Usage:
Hose interface adopts screw pressing design, please pay attention to the pressing rubber hose. It is generally put between two tubes behind water hydrogen flame gun,
1.5-2mm from machine outlet, and 0.3-0.5m from the gun.
Note:
1.The lifespan of the flash-back arrestor is limited, multiple flashback will reduce its reliability, residual electrolyte may cause blockage.
2.If the flashback arrestor is block or does not work, please check or change it immediately. replace the new one timely. Otherwise, it may cause explosion and unable to work.
Paypal has not been working consistantly recently.
To order a Unit —- 1. Email me on glknox11@live.com or
2. SMS message to 0403177183
with your name , Phone number , email address and Postal address and I will email you a Quote , my Company ABN and Payment Details
Thanks for viewing this page.
Additional information
Weight
0.5 kg
Dimensions
10 × 10 × 10 cm
Reviews
There are no reviews yet.
Be the first to review “Hydrogen Flashback arrestor” Cancel reply
Reviews
There are no reviews yet.