Sale!

Volo Electronic Fuel enhancer Module- automatic unit matches the electronic engine settings to hydrogen gas produced

$189.00

This chip has been specifically tuned for the needs of HHO generator equipped vehicles. The FS2 is dynamic – which means the FS2 will consider oxygen levels in the exhaust, along with engine speed and load, intake air temperature and volume, and many other variables to determine the most efficient fuel delivery rate and timing at up to 256 separate load points.

Excellent device that automatically senses and adjusts the fuel map of an E.F.I.  engine to save fuel when running with a Hydrogen system.  The Volo chip will force the engine to run more efficiently and save fuel even without a Hydrogen system attached.

Works whether or not a HHO gas is used but significantly increase Fuel economy when running the engine when using Hydrogen injection 

– courier costs $25

Add to Wishlist
Add to Wishlist

Description

 

Volo Electronic fuel enhancer module
Volo Electronic Fuel enhancer Module

Volo Electronic Fuel enhancer Module- automatic unit matches the electronic engine settings to hydrogen gas produced.

Increase gas production and increase the efficiency of the ECU settings which are controlling the volume of fuel injected  into the engine to match the Hydrogen gas injected into the engine

In the early days of HHO technology, many vehicles were unable to have fuel savings higher than 30% due to the strict parameters of their computer management systems. These cars have electronic fuel injection with advanced ECUs (Engine Control Units with Euro modules IV and V) and some would simply not allow fuel economy to improve beyond certain programmed values.

As HHO technology advances, more vehicles are able to benefit despite these ECU limitations. The new HHO EFIE Chip (HEC) is one of the newest products to address and solve the limitations of many modern vehicle ECUs.

With the new HHO HEC your fuel savings can go up siginifically. When using hydrogen gas as a fuel supplement, the HEC will adjust fuel delivery and timing to optimize efficiency. When HHO gas is disabled, the HEC will automatically re-adjust and switch to highly efficient, non-HHO enhanced maps.

What is a HHO EFIE Chip (HEC)?

The HEC is a chip, with a 200 mhz microprocessor, It utilizes its high speed serial input/output to communicate directly with the ECU through the OBD-II port It has been specifically developed and tuned for the needs of HHO generator equipped vehicles. The HEC is dynamic – which means the HEC will consider oxygen levels in the exhaust, along with engine speed and load, intake air temperature and volume, and many other variables to determine the most efficient fuel delivery rate and timing at up to 256 separate load points.

The HEC is a vehicle specific, custom programmed 20MHz Microcontroller. It utilizes its high speed serial input/output to communicate directly with the ECU through the OBD-II port.

The HEC is compatible with factory equipped Turbo/Superchargers, diesel engines, Flex-Fuel, & HHO supplement systems. It is NOT compatible with hybrid engine options, propane, or natural-gas.

How does the HHO EFIE Chip (HEC) Works?

Inside every ECU there is a three dimensional table of values called a Map. This table tells your fuel injectors exactly how much fuel to deliver based upon current air temperature, density, engine speed, throttle position, and other variables.

From the factory, the Map is generic and designed to provide a sluggish, no-surprises style of driving that suits a wide range of drivers. It is especially ignorant to the benefits of HHO systems and their ability to burn fuel at a much greater air to fuel mixture ratio than usual.

HHO EFIE Chip corrects this problem by providing a pre-programmed and highly tuned Map for the ECU to reference. The tuned Map contains a set of variables that directly allow a better fuel efficiency. When the ECU attempts to read specific factory settings, the Flash Chip patches the factory value with one from its tuned Map.

In this way, when the HEC Chip recognizes an HHO system is operating, parts of the factory Map are temporarily replaced with improved variables from the tuned Maps. This technique safely unleashes your engine’s ability to use less fuel and it doesn’t void the warranty.

And yes, it’s easy to remove and restore the computer to factory settings when desired.

How to Install?

Simply locate the OBD-II port, connect the HEC Chip to four wires found BEHIND the port, and you’re done. Bring the vehicle up to operating temperature and then press the reset button to start saving fuel.

Whats the difference between the normal Chips and the HEC?

The HEC is much faster than the regular Chip, which means faster & more consistent gains. The HEC also sports more memory than the regular Chip, so we are able to include more HHO specific coding.Additional Information

Our HEC Chips do not work with hybrids, propane nor natural gas vehicles. Each unit is ready to install per the provided instructions.

The HEC is compatible with factory equipped Turbo/Superchargers, diesel engines, Flex-Fuel, & HHO supplement systems.

This dynamic NEW HEC CHIP has been engineered specifically for use on vehicles using HHO Generators to save even more fuel and increase power response!

  • Eliminates the need for any controllers;
  • Eeasy to hook up – comes with quick conectors;  
  • No adjustments needed, automatically sets itself;
  • No Multi-meter needed – nothing to read or adjust; 
  • Does not touch or modify any existing sensors;
  • Attaches to wiring harness in back of OBD2 port.

Simple to install, easy-to-follow instructions; connects to the back of the OBII data link connector with only 4 wires.

Reviews

There are no reviews yet.

Be the first to review “Volo Electronic Fuel enhancer Module- automatic unit matches the electronic engine settings to hydrogen gas produced”

Your email address will not be published. Required fields are marked *