Instalation manuals for the following Hydrogen systems – click on this link

Special Instructions for Trucking installation—- MUST READ

This is for Hydrogen system Installation on Trucks with Compressors. (and  all trucks with air brakes).  Air for the Compressor is normally drawn off straight after the Primary/ Secondary Air filter assembly.  

THIS MUST BE CAPPED OFF.  An alternative air Intake line with a filter MUST Be Installed to provide the Air to the compressor.  NOt doing this has the Potential of accumulators being pressurised with a mixture of Hydrogen Gas

1. Gen 10 system
2. Gen 15 system
3. Gen 20 system
4. K20  system
5. K30 system
6. K40 system

Manuals – HydrogenFuel

Systems operation and installation is the same as shown for K20, K30  and K40… The only difference is that the Gen 10 and Gen 15 systems use a  30 amp circuit breaker.

Views: 1