Description
Views: 6
5V, 12V, 10A, PWM voltage regulator, DC Motor speed controller, continuous speed regulator, LED dimmer, power controller
Description:
Maximum voltage: 16V
Minimum voltage: 5V
Direct current: 10A
Direct current: 10A
Short maximum current: 20A (less than 10 seconds)
Speed control mode: PWM continuous speed regulation, can also be used to adjust the light
Control mode: speed control potentiometer (click clockwise to open, continue rotating clockwise from 1% to 99% speed)
Duty cycle: 0%-99% (the 0% position is the off state when the potentiometer is furthest to the left).
Control mode: speed control potentiometer (click clockwise to open, continue rotating clockwise from 1% to 99% speed)
Duty cycle: 0%-99% (the 0% position is the off state when the potentiometer is furthest to the left).
When the power is turned on, 0.002A (no need to turn off the governor for a long time is not current).
Efficiency: Maximum efficiency reaches 98%.
Volume: Length 3cm (not including potentiometer), Width 2cm, Height 1.4cm
If you are using the speed control (dimming) to manufacture the product, the store can be provided for free
Customized service, you can agree with the customer’s requirements to modify the shape of the circuit board, installation.
Efficiency: Maximum efficiency reaches 98%.
Volume: Length 3cm (not including potentiometer), Width 2cm, Height 1.4cm
If you are using the speed control (dimming) to manufacture the product, the store can be provided for free
Customized service, you can agree with the customer’s requirements to modify the shape of the circuit board, installation.
Parameters of mode, current and voltage, add other functions, etc.
Please note that the regulator is mainly used in motor speed control, if you are used to dimming the LED, you should make sure that the LED can also work with direct power supply, the dimming range of the speed regulator is from the LED to the LED connected directly to the power supply is completely turned off between dimming, if the LED is directly connected with a power that will burn through the dimmer, the dimming burns out, which normally requires a series current-limiting resistor, if you don’t know how much
Views: 6
