Hydrogen Generator systems for heavy duty trucking
Hydrogen Generator. Recently HFS were commissioned By Coogee chemicals Pty Ltd , west Australia to produce a new configuration of Hydrogen fuel systems to save fuel on their Cummins Powered Kenworth trucking.
The New configuration was mounted into a stainless steel enclosure box with stainless steel piping and stainless steel recycling container which is used to collect the hydrogen gas and pass it through the engine.
The new configuration is designed to be rhobust and capable of handling extreme conditions or rough driving terrain , high temperature . The enclosure box is made from stainless steel 316 and 2.5 mm thick material – easily able to handle reasonable impact loads . The Pumping system is 12V- 24 V with a pressure head od 8 m and only used for mixing the solution.
A digital electronic fuel enhancer module is used to adjust the sensor signals from the 1. Manifold air pressure sensor, 2, Coolant temperature sensor and 3. Air intake temperature sensor – so as to modify the engine fuel map save fuel and increase engine power and torque
The aim of the EFIE is to reduce MAP settings by 10%, increase the AIT settings by 50celcius and CTS settings by 7 celcius.
Photos below show the position of the hydrogen fuel system and efie.Cummins Powered, engine fuel map, engine power, high temperature, hydrogen fuel systems, hydrogen generator, save, save fuel